IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> 155 Genoa Report
scottydog
post Jun 8 2009, 04:14 PM
Post #1


Member
**

Group: Members
Posts: 10
Joined: 8-June 09
Member No.: 114



Well I promised everyone a report on the 155 genoa by Quantum, for those who run PHRF races.

The 155 is kevlar, nice yellow color, looks great on the boat. Lot's of "thumbs up" comments from the other boats. Had to put extra jib tracks in. You need longer jibsheets also.

Performance wise it seemed to be quite fast. In 8 kts wind we were 5.5 into the wind, and on a broad reach maxed out at 6.4 kts. Going wing on wing it seemed to pull very strong. Pointing ability seemed less than optimal, but in talking with Terry Flynn one needs to tighten the rig/headstay tension vs the class jib. Sometimes we had to coax it around the mast to tack.

The location of the jib sheet tracks tends to mix up the genoa/spinnaker sheets. Ends up being a snake orgy on either side of the cockpit.
Go to the top of the page
 
+Quote Post
Guest_jhuus_*
post Jun 10 2009, 10:00 AM
Post #2





Guests






QUOTE (scottydog @ Jun 8 2009, 04:14 PM) *
Well I promised everyone a report on the 155 genoa by Quantum, for those who run PHRF races.

The 155 is kevlar, nice yellow color, looks great on the boat. Lot's of "thumbs up" comments from the other boats. Had to put extra jib tracks in. You need longer jibsheets also.

Performance wise it seemed to be quite fast. In 8 kts wind we were 5.5 into the wind, and on a broad reach maxed out at 6.4 kts. Going wing on wing it seemed to pull very strong. Pointing ability seemed less than optimal, but in talking with Terry Flynn one needs to tighten the rig/headstay tension vs the class jib. Sometimes we had to coax it around the mast to tack.

The location of the jib sheet tracks tends to mix up the genoa/spinnaker sheets. Ends up being a snake orgy on either side of the cockpit.

Go to the top of the page
 
+Quote Post
Guest_jhuus_*
post Jun 10 2009, 10:03 AM
Post #3





Guests






Apparently in PHRF-LO a 155 genoa would subtract 6 from FS (so 159 instead of 165 with a spinnaker) and 12 from NFS (so 189 instead of 201 without).
Go to the top of the page
 
+Quote Post
scottydog
post Jun 10 2009, 11:03 AM
Post #4


Member
**

Group: Members
Posts: 10
Joined: 8-June 09
Member No.: 114



QUOTE (jhuus @ Jun 10 2009, 09:03 AM) *
Apparently in PHRF-LO a 155 genoa would subtract 6 from FS (so 159 instead of 165 with a spinnaker) and 12 from NFS (so 189 instead of 201 without).


In my club boats are allowed up to 160 genoa no correction. They gave me a flat 186 with spinnaker, and will allow 195 without chute. The sail performed well enough downwind that I think I will race genoa/NS next time, especially as I sail short handed most of the time.
Go to the top of the page
 
+Quote Post
jwgifford
post Jun 26 2009, 08:57 PM
Post #5


Newbie
*

Group: Members
Posts: 5
Joined: 25-June 09
Member No.: 126



QUOTE (scottydog @ Jun 8 2009, 05:14 PM) *
Well I promised everyone a report on the 155 genoa by Quantum, for those who run PHRF races.

The 155 is kevlar, nice yellow color, looks great on the boat. Lot's of "thumbs up" comments from the other boats. Had to put extra jib tracks in. You need longer jibsheets also.

Performance wise it seemed to be quite fast. In 8 kts wind we were 5.5 into the wind, and on a broad reach maxed out at 6.4 kts. Going wing on wing it seemed to pull very strong. Pointing ability seemed less than optimal, but in talking with Terry Flynn one needs to tighten the rig/headstay tension vs the class jib. Sometimes we had to coax it around the mast to tack.

The location of the jib sheet tracks tends to mix up the genoa/spinnaker sheets. Ends up being a snake orgy on either side of the cockpit.

Go to the top of the page
 
+Quote Post
jwgifford
post Jun 26 2009, 09:01 PM
Post #6


Newbie
*

Group: Members
Posts: 5
Joined: 25-June 09
Member No.: 126



QUOTE (scottydog @ Jun 8 2009, 05:14 PM) *
Well I promised everyone a report on the 155 genoa by Quantum, for those who run PHRF races.

The 155 is kevlar, nice yellow color, looks great on the boat. Lot's of "thumbs up" comments from the other boats. Had to put extra jib tracks in. You need longer jibsheets also.

Performance wise it seemed to be quite fast. In 8 kts wind we were 5.5 into the wind, and on a broad reach maxed out at 6.4 kts. Going wing on wing it seemed to pull very strong. Pointing ability seemed less than optimal, but in talking with Terry Flynn one needs to tighten the rig/headstay tension vs the class jib. Sometimes we had to coax it around the mast to tack.

The location of the jib sheet tracks tends to mix up the genoa/spinnaker sheets. Ends up being a snake orgy on either side of the cockpit.

How much did you tighten the forestay; i.e. how many times tighter than with class jib - such as twice as tight?
Go to the top of the page
 
+Quote Post
scottydog
post Jun 27 2009, 08:09 AM
Post #7


Member
**

Group: Members
Posts: 10
Joined: 8-June 09
Member No.: 114



QUOTE (jwgifford @ Jun 26 2009, 08:01 PM) *
How much did you tighten the forestay; i.e. how many times tighter than with class jib - such as twice as tight?


Terry suggested adjusting the forstay and shrouds 2 levels tighter than the settings for the class jib. I haven't had a chance to try it out.
Go to the top of the page
 
+Quote Post
Guest_Guest_Deeken53_*_*
post Sep 15 2009, 08:25 AM
Post #8





Guests






I am resigning myself to the fact that I need to start using a 155 in my local fleet just to compete.

Can someone provide me with the correct jib sheet track placement.

Thanks
Go to the top of the page
 
+Quote Post
Guest_Guest_scottydog_*_*
post Sep 15 2009, 12:31 PM
Post #9





Guests






QUOTE (Guest_Deeken53_* @ Sep 15 2009, 08:25 AM) *
I am resigning myself to the fact that I need to start using a 155 in my local fleet just to compete.

Can someone provide me with the correct jib sheet track placement.

Thanks


Yea the stock jib is so weak a 155 is essential IMO for light air phrf racing.

I'm not sure but I imagine track location may depend on the genny. For quantum the new jib track starts 14” aft of the cabin, and 2” lateral from the teak seat , and goes back parallel to the teak. I put in a 2' track.

Give Terry Flynn a call, he'll fix you up.
Go to the top of the page
 
+Quote Post
Guest_Guest_Deeken53_*_*
post Sep 16 2009, 12:08 AM
Post #10





Guests






QUOTE (Guest_scottydog_* @ Sep 15 2009, 12:31 PM) *
Yea the stock jib is so weak a 155 is essential IMO for light air phrf racing.

I'm not sure but I imagine track location may depend on the genny. For quantum the new jib track starts 14” aft of the cabin, and 2” lateral from the teak seat , and goes back parallel to the teak. I put in a 2' track.

Give Terry Flynn a call, he'll fix you up.



Thanks for the input,

Terry here I come.
Go to the top of the page
 
+Quote Post
scottydog
post Sep 16 2009, 08:19 PM
Post #11


Member
**

Group: Members
Posts: 10
Joined: 8-June 09
Member No.: 114



QUOTE (Guest_Deeken53_* @ Sep 15 2009, 11:08 PM) *
Thanks for the input,

Terry here I come.


The kevlar sail is light yellow, looks great, pulls hard. Huge difference in 3-8 kts. You'll also need longer jib sheets, and the sheets take some getting used to going back up to the winch. Not cheap, but as the saying goes "you wants to play you gots to pay". lol

Terry is the man, tell him Scott Mack from California says hi! Be sure and ask about tuning the rigging.
Go to the top of the page
 
+Quote Post
Bolido
post Nov 17 2009, 09:54 AM
Post #12


Member
**

Group: Members
Posts: 10
Joined: 9-February 09
From: Boqueron, Puerto Rico
Member No.: 21



QUOTE (scottydog @ Jun 27 2009, 10:09 AM) *
Terry suggested adjusting the forstay and shrouds 2 levels tighter than the settings for the class jib. I haven't had a chance to try it out.


Terry
What do you mean by 2 levels tighter? If you use the base setting (for 12 knots) what would 2 levels tighter be using a Loos Pro PT1?
Go to the top of the page
 
+Quote Post
Guest_Terry Flynn_*
post Nov 18 2009, 08:39 AM
Post #13





Guests






What I mean by this is that with the class jib we need a looser rig to power up the boat in the light winds. When you add a 155% genoa you have already added power to the rig with the added sail area. Also remember that the class jib is a few feet short on the hoist and the genoa is full hoist.
I think a good starting point on the rig for a 155% genoa would be 28 on the uppers, 25 on the lowers and 12 on the headstay.
If you have any questions please feel free to contact me at
Terry Flynn
Quantum Sail Design
Office. 281-474-4168
Mobile 713-906-5497
Go to the top of the page
 
+Quote Post

Fast ReplyReply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 6th September 2010 - 03:29 PM